Leakage of washing water is usually due to one of two reasons:
- Over-use the seal of the tank
- Wrong alignment of the float.
Required tools:
- Adjustable wrench
- Pliers
Start by closing the tap.
Empty the tank by pressing the button or unloading.
Then you lift the lid.
Then, lift the hood and clean the joint with a rag soaked in vinegar.
If the seal is worn, replace it.
If everything is normal, we will fill the tank.
When water flows through the overflow, the float is set incorrectly.
Just twist it or move it slightly until the level.
Get back to normal.